BZMBK - M08-MOLD RELEASE PASTE WAX
- MSDS: BZMBK
- Manufacturer: MEGUIAR'S INC
- Product Name: M08-MOLD RELEASE PASTE WAX
- National Stock Number: 7930-00N064701
Product Identification
Product ID:M08-MOLD RELEASE PASTE WAX
MSDS Date:02/08/1993
FSC:7930
NIIN:00N064701
MSDS Number: BZMBK
Responsible Party
IRVINE, CA 92714
US
Emergency Phone: 800-854-8073
Info Phone: 714-752-8000
Cage: EO362
Contractor
Telephone: 714-752-8000
Cage: 14088
Ingredients
PETROLEUM DISTILLATE; (LIGHT DISTILLATE)
CAS: 64742-14-9
Fraction By Weight: 10-20%
OSHA PEL N/K
ACGIH TLV: N/K
NAPHTHA PETROLEUM, HEAVY ALKYLATE; (HEAVY ALKYLATE NAPHTHA)
CAS: 64741-65-7
Fraction By Weight: 20-30%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
TURPENTINE
CAS: 8006-64-2
RTECS: YO8400000
Fraction By Weight: 5-15%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM
TURPENTINE
CAS: 9005-90-7
Fraction By Weight: 5-15%
OSHA PEL 560 MG/M3 (MFR)
ACGIH TLV: 560 MG/M3 (MFR)
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR INTENTIONAL EXPOSURE TO
HIGH CONCENTRATIONS MAY CAUSE IRRITATION TO SKIN, DIGESTIVE OR
BREATHING TRACTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SENSITIVE SKIN OR IRRITATION.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . SKIN:WASH W/SOAP & WATER. EYES:FLUSH W/CLEAR WATER FOR AT
LEAST 15 MINUTES. INGEST:DO NOT INDUCE VOMITING.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>150F,>66C
Extinguishing Media:DRY CHEMICAL, WATER, FOAM, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:CONTAIN & ABSORB. MAY BE CONTAINED IN METAL,
PLASTIC OR GLASS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP FROM EXTREME HEAT.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NONE REQUIRED FOR NORMAL USE.
Ventilation:LOCAL EXHAUST: ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:167F,75C
Vapor Pres:<2
Vapor Density:>1
Spec Gravity:0.85
Evaporation Rate & Reference:<1
Solubility in Water:NONE
Appearance and Odor:GOLD TO LIGHT PASTE W/SLIGHT ODOR OF HYDROCARBON.
Percent Volatiles by Volume:45 MAX
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZERS & ACIDS.
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:CO, CO*2 & SILICONE OXIDES.
Disposal
Waste Disposal Methods:SANITARY LANDFILLS FOR ABSORBENT MATERIALS, OR
AS REQUIRED BY FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.